Instruction manual

English 7
M
M
M
Press
and hold
First
buzze
r
Third
buzze
r
Second
buzze
r
Anytime
Press and hold
Anytime
Yea
r
Month
Day
Hou
r
Minute
Cloc
k
Select the uni
t
of temperature
Using The Monitor
Adjusting The Built-in Clock
Adjust the clock prior to use.
1. Press and hold the
AM button until the year starts
blinking.
2. Select the year using the
PM button.
Press the AM button to set the current year and
move to month/day selection. The date can be set
anywhere between the years 2006 and 2056.
3. Select the month using the
PM button.
Press the AM button to set the current month and
move to day selection.
4. Select the day using the
PM button.
Press the AM button to set the current day and
move to hour/minute selection.
5. Select the hour using the
PM button.
Press the AM button to set the current hour and
move to minute selection.
6. Select the minute using the
PM button.
(Press the AM button to go to the temperature unit
selection mode. For details, refer to page 5.)
Press the
START button to set the current
minute and activate the clock.
Setting Three Reminders
This device has 3 reminder alarms. You can set 3
different reminder alarms within a 24-hour period.
1. Press and hold the
AM button until the year starts
blinking. Then press the MEMORY button.
“P-1” is shown at the bottom of the display.
2. Select the hour using the
PM button and press the
AM button to set the hour and move to minute
selection. Press the PM button to set the minute
and press the AM button or the START button to
return to the clock display. The mark
appears on the display.
3. To set the second and third reminders, press the
MEMORY button in the reminder setting mode to
display “P-2” or “P-3”. Repeat the above process
to set each reminder.