Instruction manual

English 4
Symbols
Symbols
Function / Meaning Recommended Action
Standby and Turn the device on.
Battery installation guide
Direct current
SN
Serial number
2007
Date of manufacture
Type BF: Device, cuff and tubing are designed to
provide special protection against electrical shocks.
The indicator that appears while measurement is
in progress. It blinks when the pulse is detected.
Measurement is in progress.
Remain as still as possible.
I rregular H eart b eat indicator. (I.H.B.)
The indicator that appears when an irregular
heartbeat or any excessive body movement is
detected during the measurement.
Previous measurements stored in MEMORY.
Full Battery
The battery power indicator during measurement.
Low Battery
The battery power is low when it blinks.
Replace all batteries with new
ones, when the mark blinks.
Unstable blood pressure due to movement
during the measurement.
Try the measurement again.
Remain very still during the
measurement.
The systolic and diastolic values are within 10
mmHg of each other.
The pressure value did not increase during
inflation.
The cuff is not applied correctly.
PUL. DISPLAY ERROR
The pulse is not detected correctly.
Apply the cuff correctly, and try
the measurement again.
SYS.
Systolic blood pressure in mmHg
DIA.
Diastolic blood pressure in mmHg
PUL./min.
Pulse per minute
AM
Time in the morning
PM
Time in the afternoon
Alarm ON/OFF mark of the reminder
If you want to stop the sound,
press any button.
EC directive medical device label
WEEE label
Manufacturer
EU-representative
Refer to instruction manual/booklet
Class II device
Polarity of DC jack