Instruction manual

English 8
M
M
M
M
Press and hold
First
buzze
r
Third
buzze
r
Press
Second
buzze
r
Using The Monitor
Adjusting The Built-in Clock
The monitor has a built-in 24-hour clock. We recommend
that you adjust the clock prior to use.
1. Press and hold the CLOCK button until the digits start blinking.
2. Select the year using the
button.
Press the CLOCK button to set the current year
and move to month/day selection. The date can
be set anywhere between the years 2006 and
2056.
3. Select the month using the
button.
Press the CLOCK button to set the current month
and move to day selection.
4. Select the day using the
button.
Press the CLOCK button to set the current day
and move to hour/minute selection.
5. Select the hour using the
button.
Press the CLOCK button to set the current hour
and move to minute selection.
6. Select the minute using the
button.
Press the CLOCK button to set the current
minute and activate the clock.
Setting Three Reminders
This monitor has 3 reminder alarms. You can set
3 different reminder alarms within a 24-hour period.
1. Press and hold the CLOCK button until the digits
start blinking. Then press the
MEMORY button.
“P-1” is shown at the middle line of the display.
2. Select the hour using the
button and press the
CLOCK button to set the hour and move to minute
selection. Press the
MEMORY button to complete
the reminder setting after selecting minute.
3. Then the display shows “P-2” and the mark
for the second reminder. Repeat the above
process if you need a second reminder.
4. A third reminder can be set as well.
Month
Hou
r
Clock
Press and hold
the CLOCK button
Yea
r
Minute
Day