Instruction manual

English 6
Symbols Function / Meaning Recommended Action
EU-representative
Manufacturer
Class II device
Refer to instruction manual/booklet
Polarity of DC jack
Operation Mode
1. Normal Measurement With Storing Data (Refer to page 11)
Press the START button. Blood pressure is measured and data is stored
within the device. The device can store the last ninety sets of data in
memory.
2. Recalling The Data (Refer to page 13)
Press the MEMORY button to recall the data.
First, average of all the data is shown.
Each time the
MEMORY button is pressed,
the memory data is displayed from the most
recent.
For details on recalling data, refer to
“Recalling Memory Data” on page 13.
The device can store the last ninety sets of
data in memory.
3. Clearing The Data (Refer to page 13)
Press and hold the MEMORY button until the “ ” (memory) mark blinks to
clear the stored data.
4. Measurement With The Desired Systolic Pressure
Refer to page 12 for the measurement with the desired systolic pressure.
A
verage of
Systolic pressure
Diastolic pressure
Nos. of Data
Systolic pressure
Diastolic pressure
Pulse rate