Instruction manual

English 13

Recalling Memory Data

Note: This device stores the last ninety measurements in memory. The data is

retained as long as the batteries are in the device. When you remove the

batteries or the batteries are drained, the data will be erased.

1. Press the

MEMORY button.

Average of stored data is shown.

2. Press the

MEMORY button.

The most recent data is displayed.

3. Then, each time the

MEMORY button is

pressed, the previous data is displayed.

4. After the last data is displayed, the display

returns to the clock display.

Clearing the memory data

5. Press and hold the MEMORY button until the “ ” (memory) mark blinks

to clear the stored data.

Note: Pressing the

START button while the memory data is displayed

initiates the UA-852 to start taking a measurement.

Systolic pressure

Diastolic pressure

Pulse rate

Most recent

data

Last data

(Oldest)

verage of

Systolic pressure

Diastolic pressure

Nos. of Data