Instruction manual

8
Using the Monitor
Applying The Arm Cuff
1. Wrap the cuff around the upper arm,
about 1 to 2 cm above the inside of the
elbow, as shown.
Place the cuff directly against the skin, as
clothing may cause a faint pulse and
result in a measurement error.
2. Constriction of the upper arm, caused by
rolling up a shirtsleeve, may prevent
accurate readings.
How To Take Proper Measurements
For the most accurate blood pressure measurement:
Sit comfortably on a chair. Rest your arm on the table. Do not cross your legs.
Keep your feet on the floor and straighten your back.
Relax before measurement.
Place the center of the cuff at the same height as your heart.
Remain still and keep quiet during measurement.
Do not measure immdiately after physical exercise or a bath. Rest before taking
the measurement.
Try to measure your blood pressure at the same time every day.
Measurement
During measurement, it is normal for the cuff to feel very tight. (Do not be alarmed)
After Measurement
After measurement, press the START button to turn off the power.
Remove the cuff and record your data.
Note: The device has an automatic power shut-off function, which turns the power
off approximately one minute after measurement.
Allow at least three minutes between measurements on the same person.
Do not roll up shirtsleeve tightl
y
1 to 2 cm
A
ir hose
Cuff
Secure the fabric
fastener firmly
A
rtery position mar
k