Instruction manual

5
Symbols Function / Meaning Recommended Action
SN
Serial number
Polarity of DC jack
Operation Mode
1. Normal Measurement With Storing Data ( Refer to page 9)
Press the START button. Blood pressure is measured and data is stored within
the device. The device can store the last ninety sets of data in memory
automatically.
2. Recalling Data ( Refer to page 11)
When nothing is displayed, press the
MEMORY button to appear the data number.
The data number of the most recent
measurement and the data are displayed.
Stored data are automatically displayed in
order from the last data.
3. Clearing Data ( Refer to page 11)
Remove batteries to clear all data.
Re-install them again.
4. Measurement With The Desired Systolic Pressure
Refer to page 10 for the measurement with the desired systolic pressure.
Data number
Pres
s
Stored Data