Instruction manual

14
Take measurements at the same time every day using the procedure described
in this manual to get to know your normal blood pressure. Regular readings give
a more comprehensive blood pressure history. Be sure to note date and time
when recording your blood pressure. Consult your doctor to interpret your blood
pressure data.
Troubleshooting
Problem Possible Reason Recommended Action
Batteries are drained. Replace all batteries with new ones.
Nothing appears
on the display,
even when the
power is turned on.
Battery terminals are
not in the correct
position.
Reinstall the batteries with negative
and positive terminals matching those
indicated on the battery compartment.
The cuff does not
inflate.
Battery voltage is too
low.
(LOW BATTERY
mark)
blinks. [ If the
batteries are drained
completely, the mark
does not appear.]
Replace all batteries with new ones.
The cuff is not
fastened properly.
Fasten the cuff correctly.
You moved your arm
or body during the
measurement.
Make sure you remain very still and
quiet during the measurement.
The cuff position is not
correct.
Sit comfortably and still.
Raise your hand so that the cuff is at the
same level as your heart.
The device does
not measure.
Readings are too
high or too low.
If you have a very weak or irregular heat
beat, the device may have difficulty in
determining your blood pressure.
The value is different
from that measured at
a clinic or doctor’s
office.
Refer to “Why Measure Blood
Pressure At Home"
Other
Remove the batteries.
Place them back properly and try the
measurement again.
Note: If the actions described above do not solve the problem, contact the dealer.
Do not attempt to open or repair this product, as any attempt to do so will
make your warranty invalid.