Instruction manual

English 7
Preparation for Measurements
1. Installing / Changing the Batteries
Remove the battery cover and insert new
batteries into the battery compartment as shown,
taking care to observe the proper direction for each
battery. Use R6P, LR6, AA or similar type batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If installed incorrectly,
the device will not work.
When (LOW BATTERY mark) blinks on the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
The battery life varies with the ambient temperature and may be shorter at low
temperatures.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
Use the specified batteries only. The batteries provided with the device are for
testing the device performance and may have a limited life.
2. Connecting the Air Hose
Insert the air connector plug
firmly into the air socket.
3. Connecting the AC Adapter
Insert the AC adapter plug into the DC jack.
Next, connect the AC adapter to an
electrical outlet.
Use the specified AC adapter.
(Refer to page 18.)
AC adapter plug
DC
j
ack
Air socket
Air connector plug