Instruction manual

ManualsBrandsA&D ManualsBlood Pressure MonitorUA-767F

English 11

Using the Monitor

Adjusting the Built-in Clock

Adjust the clock prior to use.

1. Press and hold the

SET button until the

year starts blinking.

2. Select the year using the

or button.

Press the

SET button to set the current

year and move to month/day selection. The

date can be set anywhere between the years

2013 and 2059.

3. Select the month using the

or button.

Press the

SET button to set the current

month and move to day selection.

4. Select the day using the

or button.

Press the

SET button to set the current day

and move to hour/minute selection.

5. Select the hour using the

or button.

Press the

SET button to set the current

hour and move to minute selection.

6. Select the minute using the

or button.

Press the

START or SET button to turn the

device off.

Holding down the or button will

change the value continuously.

Note: After three minutes of non-operation, the

device will turn off automatically.

When the clock has not been

set, the clock display indicates

dashes as shown to the right.

START

Press and hold

Year

Month

Day

Hou

r

Minute

or

or

or

or

or

Pressing the

START

button will turn the

device off anytime.

or

Turn off