Instruction manual

5
Symbols Function / Meaning Recommended Action
Refer to instruction manual/booklet
SN
Serial number
Polarity of DC jack
Operation Mode
1. Normal Measurement With Storing Data ( Refer to page 9)
Press the START button. Blood pressure is measured and data is stored within
the device. The device can store the last thirty sets of data in memory
automatically.
2. Recalling Data ( Refer to page 11)
When nothing is displayed, press and hold the
START button to display the data number.
The data number of the most recent measurement
and the data are displayed.
Stored data are automatically displayed in order from
the last data.
3. Clearing Data ( Refer to page 11)
Remove the batteries to clear all data.
Re-install them again.
4. Measurement With The Desired Systolic Pressure
Refer to page 10 for the measurement with the desired systolic pressure.
Pres
s
Data number
Stored Data