Instruction manual

E-20
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
USING THE MONITOR WITH AC ADAPTER
The UA-1030T has an AC adapter jack to allow you to supply power from an
outlet in your home. We recommend you only use the exclusive AC adapter
to avoid potential damage to the monitor. Please contact A&D Medical at
1-888-726-9966 or if you are in Canada contact AutoControl at 1-800-461-0991, if
you would like to purchase an additional AC adapter.
CONNECTING THE AC ADAPTER TO THE MONITOR:
1. Gently insert the AC adapter plug into a 120V AC outlet.
2. Connect the AC adapter plug into the jack on the back of the monitor.
DISCONNECTING THE AC ADAPTER FROM THE MONITOR:
1. Turn the unit off by pressing the START button.
2. Disconnect the plug from the jack of the monitor quickly.
3. Gently remove the AC adapter from the outlet.
NOTE: If monitor has batteries and an AC adapter connected, the measurements stored
in memory may be lost if AC adapter is unplugged from the wall first. To ensure that
measurements remain in memory, make sure the unit is off and that the jack plugged
into the monitor is removed quickly before unplugging adapter from the wall.
Jack
Plug
AC Adapter
TB-233