Instruction manual

English 5
Using The Monitor
Installing / Changing The Batteries
1. Slide the battery cover up to open it.
2. Remove the used batteries and insert
new batteries into the battery
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3. Slide the battery cover down to close it.
Use only R6P, LR6 or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If installed incorrectly,
the device will not work.
When (LOW BATTERY mark) blinks in the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
The battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are for
testing the device performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
The stored data are cleared when the batteries are removed.
Connecting The Air Hose
Insert the air connector plug into
the air socket firmly.
Connecting The AC Adapter
Insert the AC adapter plug into the DC jack.
Next, connect the AC adapter to an electrical
outlet.
Use the specified AC adapter.
(Refer to page 14.)
Step 1
Step 3
Step 2
A
ir Hose
A
ir Connector Plug
A
ir Socket
AC Adapter Plug
DC Jack