Instruction manual

English 4
Symbols
Symbols Function / Meaning Recommended Action
Standby and Turn the device on.
Battery installation guide
Direct current
SN
Serial number
Date of manufacture
Type BF: Device, cuff and tubing are
designed to provide special protection
against electrical shocks.
The indicator that appears while
measurement is in progress. It blinks
when the pulse is detected.
Measurement is in
progress. Remain as still
as possible.
Irregular Heartbeat indicator. (I.H.B.)
The indicator that appears when an irregular
heartbeat or any excessive body movement
is detected during the measurement.
Previous measurements stored in
memory of each button.
Full Battery
The battery power indicator during
measurement.
Low Battery
The battery power is low when it blinks.
Replace all batteries with
new ones, when the
indicator blinks.
Unstable blood pressure due to
movement during the measurement.
Try the measurement again.
Remain very still during
the measurement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not applied correctly.
PUL. DISPLAY ERROR
The pulse is not detected correctly.
Check the air hose
connecter plug and cuff.
Apply the cuff correctly,
and try the measurement
again.
SYS.
Systolic blood pressure in mmHg
DIA.
Diastolic blood pressure in mmHg
PUL./min
Pulse per minute
EC directive medical device label
WEEE label
Manufacturer
REPEC
EU-representative
Refer to instruction manual/booklet
Class II device
Polarity of DC jack