Instruction manual

English 10
Operation Mode
1. Normal measurement with storing data (Refer to page 8)
Press the
START 1 (or START 2) button. Blood pressure is measured and
data is stored within the device. The device can store the last thirty sets of
data for each button. We recommend that if two people regularly use the
device, one uses the
START 1 button and the other uses START 2 button.
Recalling data
Press and hold the START 1 (or START 2) button to
recall the data. Stored data are automatically
displayed in order from the last data.
Clearing data
Remove batteries to clear all data. Re-install them again.
2. Unrecorded measurement (Guest mode)
Press both of the START 1 and START 2 buttons at once.
An unrecorded measurement is started.
3. Measurement with the desired systolic pressure
Refer to the previous page for the measurement with the desired systolic pressure.
WHO Classification Indicator
Each of the six segments of the bar indicator corresponds to the WHO blood
pressure classification described on the next page.
Pressure Bar Indicator
The indicator monitors the
progress of pressure during
measurement.
The indicator displays a segment, based
on the current data, corresponding to the
WHO classification.
:
Inflation complete
Pressurizing
Measurement in progress
Releasing air
Inflation in progress
WHO Classification Indicator
Severe hypertension
Moderate hypertension
Mild hypertension
High normal
Normal
Optimal
Data number
Stored Data
Alternation
Press and hold
Example:
Moderate
hypertension