Instruction manual

15
Displayed items depend on the display screen selected. Below is a list of displayed items for each
display.
Home display Waveform Blood
pressure
Pulse
graph
HR/PR
SpO
2
Temperature Message
1
Blood
pressure 2
traces
Two
(3.2 seconds)
Large
⎯
Medium
⎯ ⎯
2
Waveform
2 traces
Two
(4 seconds)
Small
⎯
Medium Medium Available
3
Pulse graph
1 trace
One
(4 seconds)
Medium Available Large
⎯ ⎯
4
Temperature
2 traces
Two
(3.2 seconds)
Medium
⎯
Medium Medium Available
5
Temperature
1 trace
One
(4 seconds)
Medium
⎯
Large Small Available
6 Sleep mode
⎯ ⎯ ⎯ ⎯ ⎯ ⎯
* The acronyms used in the display have the following meanings:
SYS: Systolic blood pressure
DIA: Diastolic blood pressure
MAP: Mean arterial pressure
HR: Heart rate
PR: Pulse rate
bpm: Beats per minute
* "Large", "Medium" and "Small" indicate the comparison of the item indicated in each display. For
example, "Middle" of the blood pressure is not the same as "Middle" of the temperature.
* When the temperature probe ID is set to "OFF", two home displays of "Temperature 2 traces" and
"Temperature 1 trace" will not be displayed.
Note
• A home display other than the sleep mode display will be stored in non-volatile memory if it is left
displayed for five seconds. Then, that home display is displayed every time the power is turned on.
• In the sleep mode display, the backlit amount will be reduced after five seconds.
• When a temperature alarm occurs in the display with no temperature display, the display returns to the
default display automatically.
• When any key is pressed in the sleep mode display, the display returns to the home display.
• When an alarm occurs in the sleep mode display, the display returns to the home display.
• In the sleep mode display, no buzzer for interval measurement is available.