Instruction manual

Page 31

Steps for data transmission

Step 1 Enter the parameters into the printer so that the data can be

transmitted.

Step 2 Connect the cable to both the recorder and printer. Then the

recorder displays . Refer to "Analysis Software

and Communication Cables" about the cable.

Step 3 Set the printer to "ON LINE".

Step 4 Press the START STOP key. Then is displayed

and the data is transmitted.

Step 5 When the transmission is finished, is

displayed.

Step 6 Remove the cable. The clock is displayed.

Print sample

Setup fo

printer

On line

(

Read

Remove

the cable

Connection