Instruction manual

Page 26
Use of the Cuff Cover
Step 1 Place the cuff on the cuff cover as shown.
When the cuff cover with slits is used, pass the air hose through a slit.
Step 2 Secure the cuff cover to the cuff using the fabric fasteners.
Attaching the Cuff and Recorder
Caution
If the cuff is not attached at the proper position, the recorder may not measure
the blood pressure correctly and an error may occur.
The cuff accessory is for use on the left arm, of about 20cm ~ 31cm. If you
need a different cuff, purchase a cuff of the proper size and arm position. Refer
to "Option and accessories".
Do not attach the cuff to an arm with an unhealed wound, dermatitis, etc.
Keep the cuff clean. Change the cuff cover for each patient. The cuff cover
may be used for either right or left arm cuff.
Fabric
fastene
r
Fabric fastener
Slit for air hose
Cuff
Cuff cove
r
Air hose
Slit
Air hose
Cuff
Cuff
Air hose
Fabric fastener
Fabric fastener
Cuff cove
r
Cuff cove
r
Band
Band
Fabric fastener