Instruction manual

Page 21

START STOP

AUTO ON/OFF

Steps for automatic measurement

ex. First block 08:00 ~ 21:59 frequency 30 minutes

Second block 22:00 ~ 05:59 frequency 60 minutes

Third block 06:00 ~ 07:59 frequency 10 minutes

Step 1 Press and hold the START STOP key for approx. 3 seconds. The

current mode is displayed.

Step 2 Press the AUTO ON/OFF key to display for mode III.

Step 3 Press the START STOP key. The mode is stored and the current start

time of the first block is displayed.

Step 4 Press the AUTO ON/OFF key to display "8" for 8:00 hours as the

start time of the first block.

Step 5 Press the START STOP key. The current frequency for the first block

is displayed.

Step 6 Press the AUTO ON/OFF key to display "30" for 30 minutes as

the frequency for the first block.

Step 7 Press the START STOP key. The current start time of the second

block is displayed.

Step 8 Press the AUTO ON/OFF key to display "22" for 22:00 hours as the

start time for the second block.

Step 9 Press the START STOP key. The current frequency for the second

block is displayed.

Step10 Press the AUTO ON/OFF key to display " " for 60 minutes as the

frequency of the second block.

Step11 Press the START STOP key. The current start time of the third block

is displayed.

Step12 Press the AUTO ON/OFF key to display "6" for 6:00 hours as the

start time of the third block.

To next page