Instruction manual

Page 18

Steps for setting the display and clock

This explanation uses the following examples.

ex. After reset, the measurement value is not displayed.

The clock is adjusted to 1997/ 05/ 27 14:28.

Step 1 Press and hold the START STOP key for approx. 6 seconds. The

recorder displays for adjusting the display and

clock.

Step 2 Press the AUTO ON/OFF key to display .

(A selection to display the clock only in automatic measurement)

Step 3 Press the START STOP key. The current year is displayed.

Step 4 Press the START STOP key. The current month is displayed.

Step 5 Press the AUTO ON/OFF key to display 5 (for May).

Step 6 Press the START STOP key. The current day is displayed.

Step 7 Press the AUTO ON/OFF key to display 27 (27th day).

Step 8 Press the START STOP key. The current hour is displayed.

Step 9 Press the AUTO ON/OFF key to display 14 (14th hour).

Step10 Press the START STOP key. The current minute is displayed.

Step11 Press the AUTO ON/OFF key to display 28 (28th minute).

Step12 Press the START STOP key to save these parameters. Then the

recorder displays the clock.

AUTO ON/OFF

START STOP

AUTO ON/OFF

START STOP

AUTO ON/OFF

START STOP

AUTO ON/OFF

START STOP

AUTO ON/OFF

START STOP