Instruction manual

Page 12
ID number
If you reset the recorder, the ID number is set to "1".
The ID number can be set using the optional software.
Performance specifications
Measurement method Oscillometric
Pressurization Micro-pump
Display range 0 ~ 320 mmHg
Automatic measurement 85 ~ 300 mmHg (Fitted)
Manual measurement 185 mmHg (Fixed)
Measurement range Systolic Blood Pressure 60 ~ 280 mmHg
Diastolic Blood Pressure 40 ~ 1 60 mmHg
Pulse rate 30 ~ 200 bpm
Accuracy Pressure
+
3 mmHg
Blood pressure Conforming to 1992 AAMI standard
Pulse rate
+
5 %
Minimum display division Pressure 1 mmHg
Pulse rate 1 bpm
Depressurization Constant exhaust Controlled ceramic valve
Exhaust Ceramic valve
Measurement Automatic measurement
Manual measurement
Number of measurement Approx. 200 times (Varies depending on the
environment and the condition of the Ni-MH batteries)
Memory Up to 350 sets of data
Display Normal Clock
During a measurement Pressure value
After a measurement SYS, DIA and pulse rate
Error code, function of concealing the measurement data
Clock 24-hour (1997-2096, automatic leap year setting)
Batteries 3 x Alkaline battery (type LR6, type AA, Mignon) or
3 x Ni-MH battery (type AA, Mignon)
Type of protecting
against electric shock
Internally powered equipment type BF
CE Marking The label of the medical device
by the EC directive.
C-Tick Marking The certification trade mark registered
to the ACA by the Trademark office.
Protection against
water and dust
Recorder: IP20
Carrying case (IP02): IP02
IP22 (when both are used)
AAMI: Association for the Advancement of Medical Instrumentation
ACA: the Australian Communications Authority
CE marking and C-Tick marking are labeled only for the countries where they are required.
N92