Instruction manual

Page 10
Specifications
Features
Portability
The recorder weighs approx. 215 g (including batteries) and is palm top size,
because a micro-pump is used.
The recorder is powered by LR6 type (Mignon) alkaline batteries. It is possible to
replace the LR6 type batteries with Ni-MH rechargeable batteries.
Operation & management
Clock and automatic measurement parameters may be set as needed.
If you connect to a computer and use the optional software, clock and automatic
measurement parameters can be set easily.
There are three modes for automatic measurement.
The recorder can transmit data to a printer directly. (An adaptable printer is
necessary to print the data. Refer to "Data Transmission to a Printer" for
specifications of the printer.)
The recorder has the built-in rechargeable coin Li battery to keep the clock and
automatic measurement parameters.
Charge the rechargeable battery using a charger with CE Marking.
The battery cannot be charged using the recorder.
Analysis
The time interval may be changed as needed.
The patient's blood pressure can be measured immediately at any time.
If you use the optional software, you can analyze the data widely.
Smart measurement
The measurement time is shortened by proper exhaust velocity control.
The exhaust velocity adjustment is unnecessary, because the constant exhaust is
properly controlled.
In the automatic measurement, the inflation value and stop value at exhaust is
managed to reduce the measurement time.
Functions and Specifications
Blood pressure measurement
There are two ways of blood pressure measurement.
Automatic measurement----- This automatic measurement works in accordance
with internal clock, preset time intervals and preset
mode. The measurement data is saved in memory.
Manual measurement ---------Any time you press the START STOP key, a blood
pressure measurement is performed immediately.
The measurement data is saved in memory.