Instruction manual

Page 9
Display
Sign Name Functions
Arrow The arrow points to the kind of current display in the measurement
result and function mode.
A
Automatic
measurement
"A" is displayed when the automatic measurement is selected.
When you press and hold the AUTO ON/OFF key, this sign is turned
on or off alternately.
S
Sleep When you press the AUTO ON/OFF key while in mode II of the
automatic measurement, "S" is displayed or turned off alternately.
With "S" turned off, the time interval is 15 minutes.
With "S" turned on, the time interval is 30 minutes.
B
Low battery When the recorder cannot operate all functions due to low battery,
this sign is displayed. The clock is still displayed. Please replace the
batteries immediately.
M
Full memory When data memory is at full capacity, this sign is displayed. In this
case, you cannot perform another measurement. Transfer the data,
save in other media and delete. Then "M" turns off.
Symbols
Turning on the recorder.
Turning off the recorder.
Direction guide to install batteries.
Direct current.
Serial number.
Date of manufacture.
Attention symbol. "See instruction for use."
Recorder, Cuff and tubing are designed to have special protection against electric
shocks.
Operating instructions
Refer to instruction manual/booklet
Note: On ME equipment “Follow instruction for use”
WEEE symbol
Sleep sign
Auto mode sign
Low battery sign
Full memory sign
Sign
Setup sign of
automatic measurement
Setup sign of
display and clock
Error display
ex. "Set the clock"
Systolic Blood
Pressure display
Diastolic Blood
Pressure display
Pulse display
Clock display