Instruction manual

Page 8
Name Functions
Power switch This is the main power switch. At the OFF state, all data and
parameters are stored by a backup battery. This backup battery
life is approximately 10 days with the power off.
AUTO ON/OFF key ･ When you press and hold the AUTO ON/OFF key, the automatic
measurement is started or stopped alternately.
･ When you press the
AUTO ON/OFF key at mode II of the automatic
measurement, "S" is displayed or turned off alternately. This sign
changes the interval for sleep.
START STOP key ･ When you press the START STOP key, a blood pressure
measurement is started.
･ When you press and hold the
START STOP key for approx. 3
seconds, the recorder proceeds to "Selection for the automatic
measurement".
･ When you press and hold the START STOP key for approx. 6
seconds, the recorder proceeds to "Parameters for the display
and clock".
･ When you press and hold the START STOP key for approx. 9
seconds, the recorder proceeds to "Deleting old data".
RS-232C terminal This terminal is used for data output to a printer or computer. The
optional RS-232C cable is necessary to output the data.
Reset key All data and parameters are deleted.