User manual

A&D Board User Manual and Test Procedure
21. [ ] Minimize the A&D FINE FRQ control. Verify an output of approximately 5 kHz at 13V Pk-Pk as
shown in Figure 14.
Figure 14: Oscilloscope Display of 5 kHz Square Wave
22. [ ] Turn the TDS210 SEC/DIV knob counter-clockwise to indicate 5ms/division.
23. [ ] Minimize the A&D FREQ control. Verify an output of approximately 60 Hz at 13V Pk-Pk as shown in
Figure 15.
Figure 15: Oscilloscope Display of 60 Hz Square Wave
v. 2.2, © 2005-2006 by R. B. Lineberry, W. C. Headley, & R. W. Hendricks p. 18