User manual

A&D Board User Manual and Test Procedure
10. [ ] Gradually turn the A&D AMPLITUDE knob clockwise and verify that the amplitude increases up to
approximately 10V Pk-Pk at 60 Hz as shown in Figure 10.
Figure 10: Oscilloscope Display of 60 Hz Sine Wave
11. [ ] Turn the TDS210 SEC/DIV knob clockwise to indicate 100us/division.
12. [ ] Gradually turn the A&D FREQ (60 Hz to 5 kHz) knob clockwise and verify that the frequency
increases up to approximately 5 kHz at 10V Pk-Pk as shown in Figure 11.
Figure 11: Oscilloscope Display of 5 kHz Sine Wave
v. 2.2, © 2005-2006 by R. B. Lineberry, W. C. Headley, & R. W. Hendricks p. 16