Specifications

21
11. SPECIFICATIONS
11.1. Specifications
Input sensitivity 0.2 µV / d min. (d: minimum division)
Input signal range -16 mV ~ 16 mV
Load cell excitation
voltage
5 V DC ±5% (no remote sensing)
Load cell drive capacity Up to 4 x 350 ohm load cells
Zero ±(0.2 µV ±0.001% of zero adjustment voltage) / °C (typ.)
Temperature
coefficient
Span ±0.001% / °C of reading (typ.)
linearity ±0.01 % of full scale
Maximum display
resolution
60,000
Display
Weight display: 7 segment LED display (Character height 14.6 mm)
Comparison result: red / yellow / green / yellow / red LED
Display update Approximately 10 times per second
Operating temp. -10°C ~ 40°C / 14°F ~ 104°F
Power supply
AC main (100V +10%/-15%, 50/60 Hz 20VA)
or SLA Battery (option), available use time approximately 70
hours*
Main power cord length: Approximately 3 m
Dimension 255 (W) x 119 (D) x 179 (H) mm
Weight Approximately 2.1 kg
* In the case of one 350 ohm load cell, no other option, and turning on comparator LED
(The available use times depend on the condition of the battery, how the battery is used
and the environment.)
Options
HC-02i SLA Sealed Lead Acid battery (YUASA NP4-6 recommended)
SW-03 RS-232C / Relay output
SW-04 RS-422 / 485
SW-11 Display stand / Wall-mount
Note: The options, SW-03 and SW-04, can not be used at the same time.