Specifications

18
8.3. CF Function list
Item Parameter Description
Used internally
Cf 1

3
Not available for setting change
Used internally
Cf 2

0
Not available for setting change
0
Not available for setting of function
“trc” (It is fixed to “trc 1”)
Zero tracking
Cf 3

1
Available for setting of function “trc”
When “ Cf 3 0 ”, “trc”
has no function.
0
None
1
±10% of weighing capacity

2
±50% of weighing capacity
Power on zero
range
Cf 4
3
±100% of weighing capacity
Calibration zero
reference
0
Tare by displayed division Calculation of tare
Cf 5

1
Tare by internal count
0
During tare, stable indicator has no
function
Stable indicator of
during tare
Cf 6

1
During tare, stable indicator turns on
0
Tare is not cleared by zero operation Tare clear by
zero operation
Cf 7

1
Tare is cleared by zero operation
Used internally
Cf 8

3
Not available for setting change

0
Non-limit Minus and
printing limit
Cf 9
1
Limit has function
Refer to below note.
0
No auto tare function Auto tare function
Cf10

1
Auto tare function
When “ Cf10 0 ”, “at”
“at-t” “at-f” has no
function.
0
Not available for setting of function
“5t-b” (It is fixed to “5t-b 0”)
Stable detection
range
Cf11

1
Available for setting of function “5t-b”
When “ Cf11 0 ”, “5t-
b” has no function.
Used internally
Cf12

0
Not available for setting change
 Factory setting
Note: About minus and printing limit setting (“
Cf 9”)
When setting “Cf 9” to “1”, the indicator has the following limit.
When the total weight is -19d or less, the indicator displays “-e”.
(*d = minimum division)
When the total weight is minus, the indicator does not perform the printing.