Specifications

35
Command Description Remarks
H3
When the five-level comparator mode is used:
Not used
When the three-level comparator mode is used:
Not used
When the seven-level comparator mode is used:
Set the level 5 upper limit value.
H2
When the five-level comparator mode is used:
Set the HIHI limit value.
When the three-level comparator mode is used:
Set the HI limit value.
When the seven-level comparator mode is used:
Set the level 4 upper limit value.
H1
When the five-level comparator mode is used:
Set the HI limit value.
When the three-level comparator mode is used:
Not used
When the seven-level comparator mode is used:
Set the level 3 upper limit value.
L1
When the five-level comparator mode is used:
Set the LO limit value.
When the three-level comparator mode is used:
Not used
When the seven-level comparator mode is used:
Set the level 3 lower limit value.
L2
When the five-level comparator mode is used:
Set the LOLO limit value.
When the three-level comparator mode is used:
Set the LO limit value.
When the seven-level comparator mode is used:
Set the level 2 lower limit value.
L3
When the five-level comparator mode is used:
Not used
When the three-level comparator mode is used:
Not used
When the seven-level comparator mode is used:
Set the level 1 lower limit value.
Set the six-digit value excluding
the polarity and decimal point