Specifications

6
4.3. Operations And Functions Of Switches
Switch Description
When the scale is turned off:
Touch the switch to turn ON the scale. The scale will be
automatically set to zero (power-on zero).
When the scale is turned on:
Touch and hold the switch to trun OFF the scale.
Tap the switch to ZERO the scale and display zero.
During measurement:
Touch and hold the switch to proceed to the calibration mode.
In the function setting mode to set the parameters:
Tap the switch to change the parameter of the selected item.
During measurement:
Tap the switch to choose a unit specified in the setting mode.
Touch and hold the switch to enter the comparator value setting
mode.
In the function setting mode to set the parameters:
Tap the switch to select the function item.
During measurement:
Tap the switch to tare the scale and display zero (net weight
display).
In the function setting mode to set the parameters:
Other than at the item "unit":
Tap the switch to store new parameters and return to the
weighing mode.
At the item "unit":
Tap the switch to select active / inactive for the displayed unit.
When the scale is turned off:
Touch the
ON/OFF switch while touching and holding the
TARE switch to enter the function setting mode.
Further to the above, continue to touch the TARE switch to
restore the function settings to the factory set values.
When any switches are no response,
Press the RESET switch in order to turn off the scale forcibly.
When the scale is turned on:
By pressing the switch, the scale proceeds to the calibration mode.