Specifications

4
3. PREPARATION
3.1.
Installing / Exchanging Batteries
The batteries are not included with the product. Prepare 6 x "D" size (R20P or LR20)
dry-cell batteries.
When the mark is displayed, exchange the old batteries with new ones.
1. Loosen the screws for securing
the battery cover using the
provided screwdriver, and remove
the battery cover.
2. Remove all the old batteries from
the battery compartment.
3. Install six new batteries properly
according to the + and - indicators
of polarity in the battery
compartment.
4. Close the battery cover, and
tighten the screws for securing
the battery cover.
CAUTION
 Do not mix used and new batteries. Do not mix the different types of batteries.
That may cause damage to the batteries or the scale.
 Take care of the polarity of batteries. The polarity marks are shown in the
battery compartment.
3.2. Setting Up The Scale
CAUTION
 Avoid installing the scale in direct sunlight, that may cause discoloration or
malfunctions. Place your SJ-WP on a firm weighing table so that the scale is
level. The scale will not perform accurately when it is not level.
 Place the scale on a firm surface and adjust the feet
so that the bubble of the sprit level is in the center of
the circle.
(R20P/ LR20
/ D size)
Six new
batteries
Batter
y
cover
Screw for securing
cover
Old
batteries
OK NG