Specifications

2
1. SAFETY PRECAUTIONS
All safety messages are identified by the following, "WARNING" or "CAUTION", of
ANSI Z535.4 (American National Standard Institute: Product Safety Signs and
Labels). The meanings are as follows:
WARNING
A potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
A potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
This manual is subject to change without notice at any time to improve the product.
Product specifications are subject to change without any obligation on the part of the
manufacturer.
When using the SJ-WP series, the following safety precautions should always be
followed.
WARNING
Internal service or adjustment to this product should be performed by a
qualified person.
CAUTION
Avoid installing the scale in direct sunlight, which may cause discoloration or
malfunctions.
Do not mix battery types, or new and old batteries. Replace with all new batteries at
the same time.
If the scale is not to be used for a long period of time, remove all batteries from the
battery compartment to avoid leakage.
Avoid overloading the scale.
Avoid using the weighing platform to move the scale, as that could cause damage to
the scale.
Avoid chemical solvents. Clean the scale with water.
IP67
Degrees of protection against water: Protected against temporary submergence.
Degrees of protection against solid foreign objects: Dust-tight.
International Protection of IEC60529.