Specifications

21
11.2. Restoring The Function Settings To The Factory Set Values
1. Turn the power OFF.
2.
Touch and hold the TARE switch and touch the
switch to turn the power ON and to
display the software version. Release the
switch but continue to
touch the TARE switch
until with " " blinking is displayed.
3.
Tap the SAMPLE switch.
changes to with " " blinking.
4. When
is displayed, tap the TARE switch.
The factory set values are restored. After displaying
, the scale goes to the weighing mode.
 To cancel the restoring procedure, touch and hold
the
switch to turn off the scale.
Tap
Tap