Specifications

7. COUNTING MODE

Determines a unit weight (the weight of one piece) from a known sample quantity, and

calculates how many pieces are on the weighing pan using the unit weight.

The unit weight is maintained even if the power is turned OFF.

1. Tap the UNITS switch to se lect "pcs".("pcs" = pieces)

2. Tap the SAMPLE switch to enter the sample

unit weight storing mode. The numerical value on

the left indicates the number of samples.

3. Tapping the SAMPLE switch allows you to

change the number of samples in the order

5 Æ 10 Æ 20 Æ 50 Æ 100 Æ ESC Æ 5.

• By tapping the UNITS switch when

is displayed, the scale exits the sample unit

weight storing mode to the count display.

4. When "-" appears at the right side of the number of

samples, tap the switch to zero the scale.

If necessary, place a container on the weighing

pan, and tap the TARE switch. Confirm that the

right side of the number of samples shows zero.

5. Place the correct number of samples on the

weighing pan or in the container.

6. Confirm that the STABLE indicator is turned on.

Tap the UNITS switch to calculate and store

the unit weight. Remove the samples. The scale

is set to count objects with this unit weight.

 The total weight of samples should be more than

shown below, regardless of the number of samples.

SJ-3000WP: 2.5 g

SJ-6000WP: 5 g

SJ-15KWP: 12.5 g

SJ-30KWP: 25 g

If not, the display shows

and returns

to the display of step 5. Increase the number of

samples (step 3) and try again.

7. Place the objects to be counted on the weighing pan.

Confirm

zero

Number o

samples

Samples

Weighing pan

Container

Tap