Specifications

8
 The TARE switch will tare the scale and subtract the weight to zero as a tare weight
when the weight is a plus value. In this case the ZERO ◄ and NET ◄ indicators
turn on. (TARE operation) At the zero point, the net weight display shows the tare
weight in negative, and the ZERO ◄ and NET ◄ indicators turn on.
(Note: In some countries or areas, the ZERO ◄ indicator will not turn on while
the scale is tared.)
 When the scale is tared, weighing range for net loads is reduced by the amount of
the tare weight.
 When the ZERO operation is performed in the net weight display, the tare operation
previously done is cleared and the NET ◄ indicator turns off.
(Note: In some countries or areas, the ZERO operation will not clear the TARE
operation. Tap the TARE switch after zeroing the scale with nothing
on the weighing pan.)
Auto power-off function
 If no switch is touched or tapped and the stable indicator is displayed for a certain
period of time, the scale will automatically turn off. See the function setting
to set the elapsed time to turn off.
 When or is displayed (refer to "12.2. Error Codes"), the auto
power-off function is enabled.
LCD backlight
 The LCD backlight is controlled by the functions and .
 If no switch is touched or tapped and the weight display continues to be stable for a certain
period of time, the LCD backlight will automatically turn off. The elapsed time to turn off is
set by the function setting . The backlight always on or off is also selectable.
 The function setting adjusts the brightness of the backlight.
5.3. Weight Display Resolution
The weight display resolution is a ratio of the minimum display to the weighing capacity.
The SJ-WP series has four types of weight display resolution, as shown below.
Low: 1/3,000
Normal: 1/6,000 or 1/7,500 (depending on the weighing capacity)
High: 1/12,000 or 1/15,000 (depending on the weighing capacity)
Maximum: 1/30,000
The factory setting is the normal resolution. Select the resolution according to your own
application in the function setting .
 For details about the minimum display and the weighing capacity,
refer to "13. SPECIFICATIONS".
 The weight display resolution of the Legal for Trade models is fixed. The selection in
the function setting is not available.
 In the counting mode, the scale works with the maximum resolution regardless of the
weight display resolution selected in the function setting .