Setup guide

6-44
EPC Connecting Guide
Example of Cable Usage (for a 2–node Powercluster)
Type
Function Cabling From – To Description QTY
CBLG 106–2000 Link CS2600/J1 to Node 1 CS2600/J1–>CBL1912 RS232 Direct
25M/25F
3
Link CS2600/J2 to Node 2 CS2600/J2–>CBL1912
Link CS2600/J0 to ASCII
console
CS2600/J0–>Interposer M/M
CBL 1912 Link CS2600/J1 to Node 1 CBLG106–>S1 Node 1 RS232 Direct
25M/9F
2
Link CS2600/J2 to Node 2 CBLG106–>S1 Node 2
Interposer
Modem / MB
323 concentrator
to ASCII console
(BQ300)
Link CS2600/J0 CBLG106–>ASCII console Interposer
25M/25M Di-
rect
1
TPC10 box
3C1681–0
Link CS2600 AUI to
802.3 LAN
CS2600 AUI–>RJ45
Ethernet cable
AUI/RJ45
3C1681–0
1
Ethernet Cable
CBLG179–1900
(10M)
Link CS2600 AUI to
Ethernet LAN
TCP10–>HUB RJ45/RJ45 2
Link PowerConsole AUI to
to Ethernet LAN
PowerConsole RJ45–>HUB
Figure 32. PowerConsole Cable Usage Example – Table
Legend – M: stands for Male Connector, F: for Female Connector.
Cabling Instructions
No special instructions.
Remote Maintenance Connections
Modem connections for remote maintenance purposes, are described in Remote
Maintenance, on page 12-1.