Setup guide

6-27Console Cabling Requirements
If there is no Cluster Administration Hub, that is to say no dedicated administration network,
the Console Concentrator and the Cluster Console will be connected to the customer’s LAN
network (an Ethernet network) in the customer’s premises.
In the case that the customer’s network is COAXIAL THICK or COAXIAL THIN then the
Customer is in charge of connecting the Console Concentrator and the Cluster Console to
his network with his own cables (As usual for all the Escala platforms).
A second Cluster Console can also be ordered to act just as an X terminal on the
customer’s Ethernet LAN, and thus to provide a second point for remote management.
Cabling Diagrams
Figure 17. Cluster Console with Powercluster 2 Nodes and >2 Nodes
Cabling Legend
Item
M.I. Designation Length FRU

CBL1912 Cable, Adapter RS232 (9M/25M) 0.3m 76958073-002

CBLG104-2000 Cable, local RS232 (25F/25M) 15m 90232001-001

CBLG105-1800 Cable, local RS232 (25F/25F) 7.5m 90233002-001

CBLG106-2000 Cable, remote RS232 (25M/25F) 15m 90234001-001
CBL2101 V24/V28 conn. cable (25M/25F) 3.6m 90479001-001

CBLG161-1900 Cable, Ethernet crossed RJ45/RJ45 10m 91093001-001

CBLG179-1900 Cable, Ethernet RJ45/RJ45 cat 5 10m 91094001-001

VCW3630 Cable, Ethernet to transceiver 5m 76958087-001