Setup guide

6-24
EPC Connecting Guide
[10] cs# sh !2 dp <ENTER>
– etc.
22.Check the CS/2600 network connection:
– Make for example a ping to the PowerConsole station,
using the command ping (after cs#):
[10] cs# ping @IP_PWC <ENTER>
– The ping command must respond with the message:
– pinging ... @IP_PWC is alive
23.Check that the different ports are in ”LISTEN” state.
Enter the commands (after the cs#):
[6] cs# sh –term all <ENTER>
the Port 0 is in ”command” state