Setup guide

4-3
EPC1200
List of Drawers for EPC1200 Rack
The drawers, with their rack-mount kits, that can be mounted into the EPC1200 rack are as
follows.
Legend
The following conventions are used:
– not applicable.
Yes fitted at manufacture.
Customer Fitted at customer’s site by Customer services.
No Equipment is not fitted in this rack.
Yes | No A mounting kit is offered in option. If ordered, the corresponding drawer is
mounted into the rack by manufacturing and transported. Otherwise the equipement is
not put into the rack.
Customer | No Though there is a mounting kit, the equipment cannot be transported
inside the rack. If the mounting kit is ordered, the kit (slides, ...) is fixed such that the
corresponding drawer can be mounted into the rack by the Customer Services at the
customer’s site. Otherwise the equipment is not put into the rack.
Options
EPC1200 Rack mount kits
PDU or PDB –
Additional PDU –
CPU drawer yes (RL drawer) integrated
PCI Expansion drawer – –
PCI I/O Drawer yes integrated
DAS1300 – –
DAS2900 yes CKTG100
DAS3200 yes CKTG101
DAS3500 yes CKTG101
FC-AL Hub
(Single or Double)
yes –
DLT Tape Drive (on
shelf)
(One per drawer)
no –
VDAT Mammoth
(One per drawer)
– –
Cosole Concentrator no –
Admin Ethernet Hub no –
FDDI Dual Hub no –
Fast Ethernet Switch no –
Overland LBX 4000 Customer included in CTLF026
Overland LBX 7000 Customer included in CTLF028
Figure 4. Drawers and Rack-mount Kits for EPC1200 Rack (Table).