Setup guide

12-2
EPC Connecting Guide
For configuration RMCF02, the internal modem of the S100 is prepared and configured at
manufacture. In other configurations, the integrated modem of any EPC400 is also
prepared at manufacture (configuration of the modem and RSF dial-in).
The external modem is provided, installed and configured on the client site by the Customer
Service.
An external modem is provided for EPC1200, EPC1200A and EPC440 servers:
DCUG002-11FE MODEM V34 RTC INT
DCUG002-B1FE MODEM V34 RTC BEL
DCUG002-D1FE MODEM V34 RTC NLD
DCUG002-E1EE MODEM V34 RTC GBR
DCUG002-F1FF MODEM V34 RTC FRA
DCUG002-G1FG MODEM V34 RTC DEU
DCUG002-T1FE MODEM V34 RTC ITA
The ordering document makes use of schema identifiers.
The following correspondence table identifies the where the cabling figures regarding
remote maintenance are described.
Figure
Page Number
RMCF01 12-7, and 12-7
RMCF02 12-3
RMCF03 12-6
RMCF04 12-4
Parts List
Item
M.I. Designation Length FRU
 CBL1912 Cable, Adapter RS232 (9M/25M) 0.3m 76958073-002
 CBLG104-2000 Cable, local RS232 (25F/25M) 15m 90232001-001
 CBLG105-1800 Cable, local RS232 (25F/25F) 7.5m 90233002-001
 CBLG197-2000 Cable, remote RS232 (25M/25F) 15m 91287001-001
 CBLG161-1900 Cable, Ethernet crossed RJ45/RJ45 10m 91093001-001
 CBLG179-1900 Cable, Ethernet RJ45/RJ45 cat 5 10m 91094001-001
 VCW3630 Cable, Ethernet to transceiver 5m 76958087-001