Setup guide

11-1
Tape Subsystems Cabling Requirements
Chapter 11. Tape Subsystems Cabling Requirements
Summarizing tape drive applications.
Tape Subsystems – Overview
Two tape subsystems are available for shelf mounting with the Escala Powercluster series:
• DLT 4000 (MI MTSG014)
• VDAT Mammoth (MI MTSG015).
The DLT 4000 drive can be connected to EPC400 only.
The VDAT Mammoth can be connected to EPC400 and EPC800 only.
Refer to the Cabling Guide for Multiple Bus Systems and the Cabling Guide for MCA
Systems for details, together with the vendors’ publications.