Setup guide

10-71Disk Subsystems Cabling Requirements
Case of a Shared Library
The following depicts a configuration example of an EPC400 with 2 nodes sharing an LXB
for high availability only.
Figure 127. Overall Diagram – EPC400 with 2 nodes sharing an LXB.
Cabling Legend
Item M.I. Designation Length FRU

CKTG070–0000 PCI Y SCSI cable (68MD/68MD) 1m 90920001–001

CKTG049–0000 MCA 16 Bit Y-cable (IBM FC2426) – IBM52G4234

CKTG050–0000 MCA Y-cable (IBM FC2427) – IBM52G4234

CBLG157–1700 SCSI CABLE (68MD/68MD) 6 m 90667003–002

CBLG072–1400 SCSI CABLE (50MD/50MD) FC2423 2.5m IBM52G7350

CBLF072–1800 SCSI CABLE (50MD/50MD) 6 m IBM52G7350

CTLF026 & 27 Overland daisy chain cable 0.5 m TBD

– Terminator for Y-cable CKTG070 – 90054001–001

– Terminator for Y-cable CKTG049 – IBM61G8324

– Terminator for Y-cable CKTG050 – IBM52G7350

CKTF003–0000 Terminator Feed Thru (68/50mD) – 9005401–001

CBLG158–1700 PCI/SCSI DE cable 4.75 m 90685001–001

CBLG152–1900 MCA/SCSI cable for library 10 m 90529003–001

CBLG102–1700 SCSI-2 DE cable (68 mD) 6 m 90176005–001