Setup guide

3-2
EPC Connecting Guide
List of Drawers for EPC800 Rack
The drawers, with their rack-mount kits, that can be mounted into the EPC 400 rack are as
follows.
Legend
The following conventions are used:
– not applicable.
Yes fitted at manufacture.
Customer Fitted at customer’s site by Customer services.
No Equipment is not fitted in this rack.
Yes | No A mounting kit is offered in option. If ordered, the corresponding drawer is
mounted into the rack by manufacturing and transported. Otherwise the equipement is
not put into the rack.
Customer | No Though there is a mounting kit, the equipment cannot be transported
inside the rack. If the mounting kit is ordered, the kit (slides, ...) is fixed such that the
corresponding drawer can be mounted into the rack by the Customer Services at the
customer’s site. Otherwise the equipment is not put into the rack.
Options
EPC800 Rack mount kits
PDU or PDB yes included
Additional PDU yes included
CPU drawer yes (RM drawer) included
PCI Expansion drawer – –
PCI I/O Drawer – –
DAS1300 yes CKTG089
DAS2900 yes CKTG089
DAS3200 yes CKTG090
DAS3500 – –
FC-AL Hub
(Single Hub
or Double Hub)
– –
DLT Tape Drive (on
shelf)
(One per drawer)
yes CKTG066
VDAT Mammoth
(One per drawer)
yes CKTG095 (HH external
device)
Cosole Concentrator yes|no CKTU105
Admin Ethernet Hub yes|no CKTU107 or 105
FDDI Dual Hub Customer|no CKTU106
Fast Ethernet Switch no –
Overland LBX 4000 Customer included in CTLF026
Overland LBX 7000 Customer included in CFTLF028
Figure 3. Drawers and Rack-mount Kits for EPC800 Rack (Table).