Setup guide

10-69Disk Subsystems Cabling Requirements
HA Library
MI List
IDENTIFICATOR DESCRIPTION
EXTERNAL ADD’L MEDIA (DLT4000 & DLT7000)
MTSG014–0000 20/40GB EXTERNAL DLT DRIVE
MTSG017–0000 35/70GB EXTERNAL DLT DRIVE
CKTG080–0000 START & CLEAN UP KIT for DLT
LXB 4000
CTLF026–V000 LibXpr LXB RackMount w/ 1 DLT4000
CTSF007–V000 DLT4000 for LibXpr LXB
LXB 7000
CTLF028–V000 LibXpr LXB RackMount w/ 1 DLT7000
CTSF008–V000 DLT7000 for LibXpr LXB
SCSI ADAPTERS
MSCG023–0000 PCI ULTRA SCSI DE ADAPTER EPC400
MSCG020–0000 MCA SCSI–2 F/W DE Enhanced DISK Adapter (WSA)
EPC800
MSCG030–0000 Ultra SCSI Differential PCI Adapter (6207)
EPC1200
SCSI CABLES
CKTG049–0000 MCA 0,8M Y SCSI CABLE
CKTG050–0000 MCA 16–Bit Y SCSI CABLE
CKTG070–0000 PCI 1M Y SCSI CABLE (68MD/68MD)
CKTF003–0000 PCI 1M Y SCSI CABLE + TERMINATOR FEED THRU
CBLG157–1700 6M SCSI–2 CABLE (68MD/68MD)
CBLG102–1700 6M SCSI–2 DE CABLE (68MD)
CBLG072–1400 2,5M SCSI CABLE (50MD/50MD)
CBLF072–1800 6M SCSI CABLE (50MD/50MD)
CBLG152–1900 10M SCSI CABLE FOR LIBRARY & JUKE–BOX
CBLG158–1700 4,5M SCSI CABLE (50MD/68MD)
Examples of Use
In Escala EPC, an LXB library can be attached to a single node. The library can only be
shared for high–availability by two homogeneous nodes (same node type).
EPC400-N/430-N EPC800–N EPC1200–N,/1200A-N,
EPC440-N/EPC2400-N
SCSI Adapters MSCG023–0000
(68mD)
MSCG020–0000
(68mR)
MSCG030–0000
(68mD)
HA DLT4000
(DE – 50mD)
Y cable / adapter
6m Cable / adapter
CKTF003–0000 =
[CKTG070–0000 +
(68mD/50mD)
Feed Thru]
CBLG157–1700
CKTG050–0000
CBLF072–1800
CKTF003–0000 =
[CKTG070–0000 +
(68mD/50mD) Feed
Thru]
CBLG157–1700