Setup guide

2-2
EPC Connecting Guide
List of Drawers for EPC400 Series Rack
The drawers, with their rack-mount kits, that can be mounted into the EPC400 rack are as
follows.
Legend
The following conventions are used:
– not applicable.
Yes fitted at manufacture.
Customer Fitted at customer’s site by Customer services.
No Equipment is not fitted in this rack.
Yes | No A mounting kit is offered in option. If ordered, the corresponding drawer is
mounted into the rack by manufacturing and transported. Otherwise the equipement is
not put into the rack.
Customer | No Though there is a mounting kit, the equipment cannot be transported
inside the rack. If the mounting kit is ordered, the kit (slides, ...) is fixed such that the
corresponding drawer can be mounted into the rack by the Customer Services at the
customer’s site. Otherwise the equipment is not put into the rack.
Options
EPC400 Rack mount kits
PDU or PDB yes included in RCKG002
Additional PDU yes included in PSSG020
CPU drawer yes (RT drawer) CKTG079
PCI Expansion drawer yes CKTG079
PCI I/O Drawer – –
DAS1300 yes CKTG082
DAS2900 yes CKTG082
DAS3200 yes CKTG083
DAS3500 yes CKTG083
FC-AL Hub
(Single Hub
Double Hub)
yes
RCKQ003
RCKQ004
DLT Tape Drive (on
shelf)
(One per drawer)
yes CKTG087
VDAT Mammoth
(One per drawer)
yes CKTG093
Console Concentrator yes|no CKTG097
Admin Ethernet Hub yes|no CKTG098
FDDI Dual Hub no –
Fast Ethernet Switch yes|no CKTG098
Overland LBX 4000 Customer included in CTLF026
Overland LBX 7000 Customer included in CTLF028
Figure 2. Drawers and Rack-mount Kits for EPC400 Rack (Table).