Setup guide

10-44
EPC Connecting Guide
Cabling Diagrams for Fibre Channel
Parts List
Item
M.I. Designation Length FRU

FCCQ002–1000 Cord 2CU/DB9 0,5m 91060001-001

FCCQ002–1500 Cord 2CU/DB9 3m 91060002-001

FCCQ002–2000 Cord 2CU/DB9 10m 91060010-001

FCCQ001–1800 Cord 2FO/M5/DSC 5m 91061005-001

FCCQ001–2100 Cord 2FO/M5/DSC 15m 91061015-001

DCOQ001–0000 FC MIA 1/M5/DSC – 91071001-001

DCCG147–0000 PCI 64-bit Copper Fibre Channel Adapter – LP8000e

DCCG148–0000 PCI 64-bit Optical Fibre Channel Adapter – LP8000e
Chaining DPE and DAE
To connect a DPE and DAEs, you must use copper cables whose maximum length is 10
meters. As a result, the distance between a DPE and A DAE cannot exceed 10 meters.
Cabling a DAE as an External Device
In standard configurations, only one DAE can be attached to a node’s FC adapter. Up to two
DAE,s, hence with two FC adapters can be ordered per node. The following figure shows a
chained DAE with one Link Control Card. This is not a standard offer.
Figure 98.A chained DAE with one Link Control Card