Product specifications

Page 96 AD-4402
9.
9.9.
9. Maintenance
MaintenanceMaintenance
Maintenance
9.1.1.
9.1.1.9.1.1.
9.1.1. Basic Operation
Basic OperationBasic Operation
Basic Operation
To enter the maintenance function Press and hold the ENTER key and press the
key in the weighing mode.
Select the menu maintenance using the key
and the ENTER key.
To select an address of the parameter The , SHIFT + , ENTER, ESC keys.
To change the parameter The , SHIFT + , Alphanumerical, ENTER,
ESC keys.
To exit the mode The ESC key.
(To return to the weighing mode)
9.2.
9.2.9.2.
9.2. Mon
MonMon
Monitor Mode
itor Modeitor Mode
itor Mode
The monitor mode is used to check the indicator during the weighing sequence.
9.2.1.
9.2.1.9.2.1.
9.2.1. Monitoring the Control I/O Function
Monitoring the Control I/O FunctionMonitoring the Control I/O Function
Monitoring the Control I/O Function
Used to monitor the status of the I/O terminals.
9.2.2.
9.2.2.9.2.2.
9.2.2. Monitoring the Built
Monitoring the BuiltMonitoring the Built
Monitoring the Built-
--
-in
in in
in RS
RSRS
RS-
--
-485 Interface
485 Interface485 Interface
485 Interface
The current communication data is displayed.
123 kg
CONTROL 00010001000
a11 a1
I/O 00110100001
b11 b1
Input terminal A1
Output terminal B1
When [
genf- 1] is slow, it
may not display all data.
Sent data
123kg
RNET
RNET0099,1234567,123456789
r5-485 rcu and 5nd
Received data
Parity: p
Framing:
f