Product specifications

AD-4402 Page 67
7.5.3.
7.5.3.7.5.3.
7.5.3. Tare
Tare Tare
Tare
The relation of the display is as follows:
Net = Gross - Tare
Concerning Parameters of the Function
Prohibiting tare during unstable weighing
[genf- 9] Tare and zero compensation at unstable status
[Function] - [Function setting] - [General] - [Weighing]
Prohibiting tare during negative weighing
[genf-10] Tare at negative GROSS weight
[Function] - [Function setting] - [General] - [Weighing]
Resetting tare at turning on the indicator
[genf-13] Clear mode at power ON
[Function] - [Function setting] - [General] - [Weighing]
7.5.4.
7.5.4.7.5.4.
7.5.4. Preset Tare (Fixed Tare Function)
Preset Tare (Fixed Tare Function)Preset Tare (Fixed Tare Function)
Preset Tare (Fixed Tare Function)
A preset tare can be stored in each material code.
Concerning Parameters of the Function
Using preset tare
[genf-11] Preset tare
[Function] - [Function setting] - [General] - [Weighing]
Using preset tare for partial material code
[genf-12]
Preset tare=0
[Function] - [Function setting] - [General] - [Weighing]
Classifying normal tare and preset tare on the serial data
[genf-07] Tare Header
[Function] - [Function setting] - [General] - [Weighing]
7.5.5.
7.5.5.7.5.5.
7.5.5. Customizing
CustomizingCustomizing
Customizing the Function Key (Key Design
the Function Key (Key Design the Function Key (Key Design
the Function Key (Key Design)
))
)
Refer to" 2.2.1. Keys" of the front panel regarding key operation.
Refer to "10.4. Parameter List" of the function list regarding key function.
Concerning Parameters of the Function
Setting F1, F2, F3 and F4 keys
[0tHf- 2] to [0tHf- 5]
[Function] - [Function setting] - [General] - [Other]