Product specifications

Page 54 AD-4402
7.3.9.
7.3.9.7.3.9.
7.3.9. Mixing Sequence
Mixing SequenceMixing Sequence
Mixing Sequence
The mixing sequence is used to mix or stir material. The signal is output from the I/O
terminal set to mixing. The timing of batch finish, discharge finish and recipe finish
can be selected.
Concerning Parameters of the Function
Using the mixing sequence
[0utf-nn] [12] Mixing
nn: terminal number of the I/O.
[Function] - [Function setting] - [Control I/O] - [Output]
Relay output (OP-02), parallel I/O (OP-05) can be used.
Mixing material at batch finish
[5q f-14]
[Function] - [Function setting] - [Sequence] - [Control] - [ Batch finish
action ]
Mixing material after discharge
[5q f-15] [Function] - [Function setting] - [Sequence] - [Control] - [ Discharge finish
action ]
Mixing material at recipe finish
[5q f-17] [Function] - [Function setting] - [Sequence] - [Control] - [ Recipe finish
action ]
Storing the time of mixing
[5q f-47] [Function] - [Function setting] - [Sequence] - [Timer] - [ Mixing time output
on ]
Safety check during mixing
[5q f-74]
[Function] - [Function setting] - [Sequence] - [Safety] - [ Mixing safety
check
]
Advise
Safety check during mixing
When the specified input terminals at [5q f-74] are all ON, it supposes that the
sequence is safe and is continued. If any terminal is OFF, an error code is output and
sequence is stopped.