Product specifications

ManualsBrandsA&D ManualsAnalytical InstrumentsMulti Function Weighing Indicator AD-4402

Page 50 AD-4402

7.3.6.

7.3.6.7.3.6.

7.3.6. R

Recipe

ecipe ecipe

ecipe S

Sequence

equenceequence

equence

The recipe sequence mixes preset final weights of multiple materials that are stored

in a recipe code. One hundred recipe codes can be stored in the indicator. A recipe

code can store ten material codes and the order to mix them.

There are the following two modes that can be selected at Recipe mode.

Semi-automatic [5qf- 8] [1] The mode that uses (external) start commands for

each material.

Automatic [5qf- 8] [2] The mode that does not need each start command.

When an under weight occurs in a material, an error

code SQ.ERR 2 is displayed and the sequence

stops.

Concerning Parameters of the Function

Selecting normal batching of built-in automatic program mode.

[5q f- 8] Recipe mode

[5q f- 8] [1] Semi-automatic mode, or

[5q f- 8] [2] Automatic mode

[Function] - [Function setting] - [Sequence] - [Basic] - [Recipe mode]

Setting the display to zero automatically when starting the recipe sequence.

[5q f-16]

[Function] - [Function setting] - [Sequence] - [Control] - [Recipe start action]

Clearing tare values, mixing them and discharging them when finishing the recipe

sequence.

[5q f- 17]

[Function] - [Function setting] - [Sequence] - [Control] - [Recipe finish action]

Changing the width of the finish signal output of the recipe sequence.

[5q f-45]

[Function] - [Function setting] - [Sequence] - [Timer] - [Recipe finish output

on]

Calculating totals in each recipe code.

[5q f-62]

[Function] - [Function setting] - [Sequence] - [Total] - [Automatic recipe code

total]

Weighing a single material code during a recipe sequence

When it is necessary to weigh the material code temporarily during a recipe sequence,

use recipe prohibition command of the external I/O or OP-05. When the prohibition

works, the material code can be used and total of the recipe is not total.

Setting of the I/O.

[1n f-nn] [49] Recipe interrupt (Prohibition of recipe sequence)

nn: terminal number of I/O.

[Function] - [Function setting] - [Control I/O] - [Input]